Brass 1" NPSH to 1" NPT Double Male (Hex)

Description

Male to male adapters are used to bridge two female hose, pipe or valve fittings.
NPSH:
National Pipe Straight Hose (NPSH) or Iron Pipe Thread (IPT) has the same threads per inch (TPI) as National Pipe Tapered (NPT) but the thread does not taper. NPSH is a straight thread and seals by a gasket in the female coupling which allows for a swivel, just like NH / NST, which make both ideal for hose couplings. Warning - It will NOT thread into a female NPT pipe. For example, a male NPSH coupling will NOT thread into a female metal or pvc pipe.
NPT:
National Pipe Tapered is common in plumbing and some industrial uses. Sometimes referred to as pipe thread because PVC pipe and schedule 40 pipe are typically threaded in NPT. As its name implies this is a tapered thread so that the outside diameter of the male (ODM) gets smaller towards the end of the fitting and the inside diameter of the female narrows with depth. As the two fittings are threaded together the opposite tapers force thread friction and makes the seal without the use of a gasket.
1" Male Adapter
Inside diameter of a male adapter - 1 inch
Outside diameter of a male NH / NST adapter - 1.375 inches (8 Threads per inch)
Outside diameter a male NPSH or NPT adapter - 1.295 inches (11.5 Threads per inch)
Our company is located in North Carolina and we are firefighter owned and operated since 2011.